12 O’clock Labs Programmable Brake Light Safety Pulser

This 12 O’Clock Labs Programmable Brake Light Safety Flasher device is Universal and it comes with the Upgraded New Plug and Play Factory Side Plug In Ends. This makes the installation so much easier; And they now come with wiring diagram helps available to make it easy for you to DIY Installation!!

Wake up Drivers behind you when you’re stopping. This 12 O’clock Labs Flasher Device will pulse your brake light Automatically to get the attention of the driver behind you!

Both Plug and Play and easy to install universal modules are available.

Designed to work for any motorcycle with a DC electrical system such as Yamaha, Honda, Kawasaki, Suzuki, etc. (There are a couple KTM & Husqvarna enduro models that do not use DC for the turn signals, but can be modified to use DC).

Over 1000 possible pattern combinations with individually programmable Flash Speeds, Pre-Delay, and Flash Durations, as well as a disable feature to disable the unit. This device gives the end user the widest range of possibilities for customizing your tail light safety flash. With simple programming setup using only your brake lever, their is no disassembly or removing of the seat required to change the programming on the device

We sell and ship at the lowest prices allowable on these products to our Fellow Stromtrooper – Vstrom Riders everywhere.

Use svracingparts.com/contact/ for information on Group Buy Offers and Shipping in bulk.

Also Available and Recommended are:

The Fixed Rate Turn Signal Flasher device is Highly Recommended and comes with the mating connector set, so it can be wired in for custom applications if needed.

The Fixed Rate Turn Signal Flasher Can be ordered from the drop down boxes.
This device is plug and play, as well as universal. It’s designed to work for any motorcycle with a DC electrical system such as Yamaha, Honda, Kawasaki, Suzuki, etc. (There are a few KTM & Husqvarna enduro models that do not use DC for the turn signals, but can be modified to use DC). This device comes with the mating connector set, so it can be wired in for custom applications if needed.

OEM Connector
The Fixed Rate Flasher is a direct plug-in replacement for the following OEM part numbers:
Suzuki OEM Part: 38610-26E00

This device, as well as aftermarket turn signals, generally use much less current than stock turn signals, thus an increased flash rate will occur. Load resistors or a fixed rate turn signal flasher will get your flashers operating at the normal flash rate again.

Includes two adapters per set (meaning you can operate both front turn signals with just purchasing one set).

Features

• Independently programmable flash speed, flash duration, and pre-delay.
• Works for LED or Standard Bulb Tail Lights.
• All Solid State design.
• Meets or exceeds OEM load rating specifications.
• Designed for DC electrical systems (most are).
• Over 1000 possible flash pattern combinations.
• Simple programming setup with your brake lever.
• Extremely compact unit size; 20mm x 20mm x 12mm